Vortex uses and features
Plastic Vortex scrubber is a wet filtration vacuum system for particle separation entirely built from plastic. Air suction is via plastic industrial blower connected to the facility. The scrubber is suitable for particulate pollutants separation with the following characteristics: volatile, combustible, wet, moist, sticky and greasy and with high temperature. Due to these characteristics, filtration using cloth filters is not feasible. Fabric filters can be easily clogged and require further high operating expenses or have an explosion risk. The primary industrial use for plastic vortex scrubbers is dust suction and corrosive salts from hygroscopic and wet chemical production.
Models:
W-400-P vortex scrubber for up to 4000 cubic meters per hour [m^3/hr] flow rate
W-600-P vortex scrubber for up to 6000 cubic meters per hour [m^3/hr] flow rate
W-800-P vortex scrubber for up to 8000 cubic meters per hour [m^3/hr] flow rate
For higher capacities, parallel installation is possible.
All the parts of the scrubber system built from extremely thick polypropylene providing mechanical strength and a HEAVY DUTY structure as well as process durability over time.
User benefits
High filtration efficiency and compliance with particles larger than 10 Micron.
Smooth operation and simple maintenance providing time-saving and Significant financial savings on spare parts.
Blower located on the clean side of the scrubber.
Large service entry allowing convenient access for scrubber treatment.
Automatic elevation control.
Corrosion resistant.
All the facilities and systems adjusted to the customer's practical needs.
.png)
.gif)
